FEATURES
- 2-way sound reinforcement enclosure
- 15″ heavy-duty woofer with 2 3/8″ voice coil & 50 oz. magnet
- RX 14 compression driver, with 1.4″ titanium diaphragm
- 400W program/800W peak power handling
- Patented Quadratic Throat
- Waveguide technology, 100 by 50-degree coverage
- Asymmetrical horn aims the sound down 10°, at the audience, not over their heads
- Crossover network for driver protection and EQ
- High-frequency driver protection
- Durable plastic injection-molded trapezoidal enclosure
- Extra angled section on right side allows floor monitor use
- Full-coverage heavy-duty perforated steel grilles, with powder coat finish
- Pole mount molded-In
- Top, bottom and right side flying point inserts
- Enclosure materials and finish: Black ABS plastic with textured surface, black powder-coated perforated grille
- Mounting provisions: Unit has two sets of two M10 inserts, one pair on the top, and one pair on the bottom. Additional mounting points are a set of four M8 inserts on the top, and a set of four on the right side in the handle recess, and a set of four on the bottom, which use the Peavey VersaMount 70+ mounting bracket.
- Four rubber feet provide vibration free floor or stage use, and a molded-in stand mounting cup is on the bottom.
Order a pair today and rock the house next week.
SPECIFICATIONS
PVx 15 2-Way Passive PA Speaker Cabinet
- Frequency Range, 1 meter on-axis, swept-sine in half space environment: 45Hz to 21kHz
- Frequency Response, 1 meter on-axis, swept-sine in anechoic environment: 57Hz to 20kHz (±3 dB)
- Usable Low Frequency limit (-10dB point anechoic): 43Hz
- Power Handling: Power Rating (program): 400W
- Peak Power Capacity (peak): 800W
- Sound Pressure Level, 1 Watt, 1 meter in anechoic environment: 97dB SPL, (2.83V input)
- Maximum Sound Pressure Level: (1 meter): 120 dB SPL continuous.126 dB SPL peak
- Radiation Angle measured at -6dB point of polar response:
- Nominal: 100° horizontal X 50° vertical
- (Axis of the vertical main polar lobe is angled down 10°, resulting in the angular pattern with respect to straight ahead being +15, -35°)
- Transducer Complement: Heavy-duty 15″ woofer with 2-3/8″ voice coil & 50 oz. magnet
- RX14 1.4″ titanium diaphragm
- dynamic compression driver
- Box Tuning Frequency: 53 Hz
- Crossover Frequency (internal passive): 2.6kHz
- Impedance (Z): Nominal: 8.0 Ω
- Minimum: 6.5 Ω
- Input Connections: One four-pin twist-lock connector paralleled with a 1/4″ phone jack
- Dimensions: 28.25″ x 18.90″ x 18.71″, 718 mm x 480 mm x 475 mm
- Rear: 26.25″ x 10.25″ x 18.71″, 667 mm x 260 mm x 475 mm
- Weight: 47 lb. (21.4 kg)
